GB - 10
ENGINE
Engine Switch
The engine
switch has two
positions:
1. OFF – Engine
will not start or
run.
2. ON – Engine
will start and run.
Choke Control Lever
1.Choke Closed
position: chokes
off air to engine
for easier start.
2.Choke Open
position: allows
for normal
operation.
IMPORTANT:
Gradually open choke after
engine starts.
Throttle Control Lever
The throttle controls the
engine speed. To
increase or decrease
the engine speed,
adjust to:
1. Fast (Normal or
Warm Starts)
2. Part-Throttle
3. Slow (Cold Weather
Starts)
Fuel Shut-Off Valve
IMPORTANT: The fuel shut-off valve MUST
be in the closed position prior to
transporting the unit.
The fuel shut-off valve has two positions:
Recoil Starter Handle
When pulled, handle will turn engine over.
IMPORTANT:
DO NOT let handle snap back
against starter.
USING THE BLOWER
Air flow can be directed to the front or to the
side of the unit using the direction control
lever.
•
The front discharge position is used to
move debris away from walls, curbs,
fences, etc. This position pushes the
debris to the front of the unit.
•
The side discharge position moves
debris to the side and is used to form
piles or rows of debris.
The horizontal air flow deflector is used to
force airflow down to allow it to penetrate
under heavier or wet debris
OPERATION
WARNING:
AVOID INJURY. Read
and understand the entire
Safety
section before proceeding.
1
2
2
1
1
3
2
FAST
SLOW
WARNING:
AVOID INJURY! Do not
move through or stand in the air flow
with the engine running. Blown debris
can cause injury.
Open Position:
Use this position
to run the unit.
Closed Position:
Use this position
to service,
transport, or
store the unit.
Summary of Contents for 947103-169cc
Page 21: ......