HY10-1632-M2.1/US
Parker Hannifin Corporation
Accumulator & Cooler Division
United States
Installation & Disassembly
Bladder Accumulators
10
Assembly & Disassembly
5
Figure 16
: Install metal backup washer (Item 18)
over hydraulic port assembly and push into the shell
fluid port to bottom it out on the anti-extrusion ring
(Item 12).
6
Figure 17
: Install O-ring (Item 14) over hydraulic port
assembly (Item 7) and push it using a blunt, rounded
edge, flathead screw driver or a ball head hex into
the shell’s fluid port until it bottoms out against
the washer.
CAUTION: Do not twist or damage o-ring.
7
Install O-ring backup (Item 16) over hydraulic port
assembly (Item 7) and push until it bottoms against
O-ring (Item 14) (1-40 gallon sizes and 5K only).
8
Figure 18
: Insert spacer (Item 10) with the
smaller diameter of the shoulder facing the
accumulator shell.
Figure 16
Figure 17
Figure 18
