background image

HY10-1632-M2.1/US

Parker Hannifin Corporation

Accumulator & Cooler Division

United States

Installation & Disassembly

Bladder Accumulators

If you have questions about the information contained in 
this Maintenance & Installation Guide, please contact:

Accumulator & Cooler Division - Americas 

phone

 815 636 4100

parker.com/accumulator

The information specified in this guide serves to help 
understand how to install & maintain the product. The 
information given does not release the user from their 
own judgment and obligation of verification. The natural 
process of wear and aging also impacts how easily a 
product can be serviced.

Extra care is taken in the preparation of this literature, 
but Parker is not responsible for any inadvertent 
typographical errors or omissions. Information in this 
guide is only accurate as of the date of this publication. 
For a more current information base, please consult the 
Parker Accumulator & Cooler Division website at: 

www.parker.com/accumulator 

Machesney Park, Illinois

10711 N. Second Street, Machesney Park, Il 61115

© Copyright 2016 Parker Hannifin Corporation. All rights reserved.

Santa Fe Springs, California

14087 Borate Street, Santa Fe Springs, CA 90670

WARNING - USER RESPONSIBILITY

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS 
CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product 
or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely 
responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, 
safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable  
industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided 
from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide 
component or system options based upon data or specifications provided by the user, the user is responsible for determining that such 
data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.

!

Offer of Sale

The items described in this document are hereby 
offered for sale by Parker Hannifin Corporation, its 
subsidiaries or its authorized distributors. This offer 
and its acceptance are governed by the provisions 
in the “Offer of Sale.”

Summary of Contents for BA Series
















Reviews: