OEM650/OEM650X • OVERVIEW
i
Installation & Operation of Compumotor Equipment
It is important that Compumotor motion control equipment is installed and operated in such a
way that all applicable safety requirements are met. It is your responsibility as a user to ensure
that you identify the relevant standards and comply with them. Failure to do so may result in
damage to equipment and personal injury. In particular, you should review the contents of the
user guide carefully before installing or operating the equipment.
Under no circumstances will the suppliers of the equipment be liable for any incidental,
consequential, or special damages of any kind whatsoever, including but not limited to lost
profits arising from or in any way associated with the use of the equipment or this user guide.
Safety Warning
High-performance motion control equipment is capable of producing rapid movement and very
high forces. Unexpected motion may occur especially during the development of controller
programs. KEEP CLEAR of any machinery driven by stepper or servo motors and never touch
them while they are in operation.
High voltages exist with in enclosed units, on rack system backplanes, and on transformer
terminals. KEEP CLEAR of these areas when power is applied to the equipment.
Parker Compumotor constantly strives to improve all of its products. We reserve the right to
modify equipment and user guides without prior notice. No part of this user guide may be
reproduced in any form without prior consent from Parker Compumotor.
Important User Information
© Compumotor Division of Parker Hannifin 1993 All rights reserved
88-013157-02A
For assistance in the United States, contact:
For assistance in the United States, contact:
Compumotor Division of Parker Hannifin
5500 Business Park Drive
Rohnert Park, CA 94928
Telephone: (800) 358-9070
Fax: (707) 584-8015
For assistance in the United States, contact:
Compumotor Division of Parker Hannifin
5500 Business Park Drive
Rohnert Park, CA 94928
Telephone: (800) 358-9070
Fax: (707) 584-8015
For assistance in Europe, contact:
For assistance in Europe, contact:
Parker Digiplan
21 Balena Close
Poole, Dorset
England BH17 7DX
Telephone: 0202-690911
Fax: (707) 584-8015)
For assistance in Europe, contact:
Parker Digiplan
21 Balena Close
Poole, Dorset
England BH17 7DX
Telephone: 0202-690911
Fax: (707) 584-8015
Compumotor
