Parker DME012-RX, User Manual

15

DME012-RX - DME080-RX

5.

Servicing

The recommended Service procedures identified in table 5.2 and all other repair and calibration work should be undertaken by a 

domnick

hunter

trained, qualified and approved engineer.

5.1 Cleaning

Clean the equipment with a damp cloth only and avoid excessive moisture around any electrical sockets. If required you may use a mild
detergent, however do not use abrasives or solvents as they may damage the warning labels on the equipment.

5.2 Service 

Intervals

Description of Service Requirement

Typical Recommended Service Interval

Component

Operation

Daily

W

eekly

3 Months

6 Months

12 Months

24 Months

30 Months

Dryer

Check POWER ON indicator is illuminated.

-

-

-

-

-

-

Dryer

Check STATUS / FAULT indicators located
on the control panel.

-

-

-

-

-

-

Dryer

Check for air leaks.

-

-

-

-

-

-

Dryer

Check the pressure gauges during purging
for excessive back pressure.

-

-

-

-

-

-

Dryer

Check the condition of electrical supply
cables and conduits.

-

-

-

-

-

-

Dryer

Check for cyclic operation.

-

-

-

-

-

-

Dryer

Replace the active exhaust silencers

Recommended Service A

-

-

-

-

-

-

Filtration

Replace the inlet, outlet and control air 
filters, and service drains.

-

-

-

-

-

-

Dryer

Replace / Calibrate dewpoint transmitter

-

-

-

-

-

-

Dryer

Replace the valve seats and seals.

Recommended Service D

-

-

-

-

-

-

Dryer

Replace the Desiccant.

Recommended Service E

-

-

-

-

-

-

Check

Replace

Table 5.2