Parker F11 series, Service Spare Parts List

Bulletin MSG30-5511-M1/UK

16

Parker Hannifin

Pump & Motor Division Europe

Trollhättan, Sweden

Service Manual/Spare Parts

Series F11

Assemble F11

21.  Carefully tap down shaft seal and sup-

port ring.

22.  Assemble the retaining ring. Make sure 

the chamfer is downwards.

23.  Assemble the hex. screws and torque 

them to specified value, shown on 

page 17.

24.  Tap down the flat key and turn the 

shaft at least one rev. Make sure the 

back-lash of the gears are correct 

(see page 17).

Bulletin 

MSG30-5511-M1/UK

Series F1

1

1

6

Parker Hannifin

Pump & Motor Division Europe

Trollhättan, Sweden

Service Manual/Spare Parts

Assembly F1

1

Assembling

3.

Place the distance ring on the big

tapered roller bearing.

6.

Place the lock washer(s) on to the

shaft.

21.

Carefully tap down shaft

 seal

and 

support ring.

22.

Assemble the retaining ring.

Make

sure the chamfer is

downwards.

retaining 

ring

back-up ring

23.

Assemble the hex

.

 screws

 and

torque them to specified

value,

shown on page 

1

7

.

24. T

ap down the flat key and

turn the

shaft at least one rev.

Make 

sure the

back-lash of the

gears are

correct (see

page 

1

7

).

Assembling

Bulletin 

MSG30-5511-M1/UK

Series F1

1

1

6

Parker Hannifin

Pump & Motor Division Europe

Trollhättan, Sweden

Service Manual/Spare Parts

Assembly F1

1

Assembling

3.

Place the distance ring on the big

tapered roller bearing.

6.

Place the lock washer(s) on to the

shaft.

21.

Carefully tap down shaft

 seal

and 

support ring.

22.

Assemble the retaining ring.

Make

sure the chamfer is

downwards.

retaining 

ring

back-up ring

23.

Assemble the hex

.

 screws

 and

torque them to specified

value,

shown on page 

1

7

.

24. T

ap down the flat key and

turn the

shaft at least one rev.

Make 

sure the

back-lash of the

gears are

correct (see

page 

1

7

).

Bulletin 

MSG30-5511-M1/UK

Series F1

1

1

6

Parker Hannifin

Pump & Motor Division Europe

Trollhättan, Sweden

Service Manual/Spare Parts

Assembly F1

1

Assembling

3.

Place the distance ring on the big

tapered roller bearing.

6.

Place the lock washer(s) on to the

shaft.

21.

Carefully tap down shaft

 seal

and 

support ring.

22.

Assemble the retaining ring.

Make

sure the chamfer is

downwards.

retaining 

ring

back-up ring

23.

Assemble the hex

.

 screws

 and

torque them to specified

value,

shown on page 

1

7

.

24. T

ap down the flat key and

turn the

shaft at least one rev.

Make 

sure the

back-lash of the

gears are

correct (see

page 

1

7

).

Bulletin 

MSG30-5511-M1/UK

Series F1

1

1

6

Parker Hannifin

Pump & Motor Division Europe

Trollhättan, Sweden

Service Manual/Spare Parts

Assembly F1

1

Assembling

3.

Place the distance ring on the big

tapered roller bearing.

6.

Place the lock washer(s) on to the

shaft.

21.

Carefully tap down shaft

 seal

and 

support ring.

22.

Assemble the retaining ring.

Make

sure the chamfer is

downwards.

retaining 

ring

back-up ring

23.

Assemble the hex

.

 screws

 and

torque them to specified

value,

shown on page 

1

7

.

24. T

ap down the flat key and

turn the

shaft at least one rev.

Make 

sure the

back-lash of the

gears are

correct (see

page 

1

7

).