37
WWW.PARKERMOTION.COM
PH: (724)
-
861
-
8200
HMR Series Positioners
9.10 Drive Shaft Installation for Belt Units
•
Disassemble belt from instructions in
previous section
9.10.3 Disassembling of Drive Belt
.
•
Remove
snap rings
from each side of shaft.
•
Remove old
drive shaft
and replace. Insert new
snap rings
into grooves inside end block housing.
•
Reinstall
end block covers
and belt
clamping assembly
.
•
Retension the belt per section
9.7.1 Check Belt Tensioning .
Snap Ring