Installation and servicing manual
Shell & Tube Cooler
6
Parker Hannifin Corporation
Hydraulics Group
Catalogue HY10-6014-UM/CN
Product Parts Name/Installation
3. Product Parts Name
4. Installation
4.1 Before Installation
Heat exchanger performance, lifetime and freedom from
operating difficulties are largely depending on:
1.
Proper thermal design
2.
Proper physical design
3.
Manner of installation, including design of foundation
and piping.
4.
The method of operation
5.
The thoroughness and frequency of cleaning.
6.
The materials, workmanship, and tools used in
maintenance and making repairs and replacements.
The heat exchange effect of Shell & Tube Oil Cooler is
maximized when it is installed horizontally or vertically. When the
equipment is installed vertically, the anchor bolt and clamping
band may be loosened due to system shock or other external
reasons. Ensure that you inspect periodically to prevent any
damage to your property or to the product.
FAILURE TO PREFORM PROPERLY MAY BE DUE TO ONE OR
MORE OF THE FOLLOWINGS:
1.
Exchanger being dirty.
2.
Operating conditions being different than
design conditions.
4.2 Installation Directions
Ensure that you check the safety instructions
accompanying the product when handling,
moving, and/or installing it.
Cooler, when installed vertically, should be installed with water
draining plugs facing down (WATER INLET and OUTLET
facing up).
The shell and tube cooler may easily be dropped, and
damaged, when being moved for installation or repair. Ensure
that you use a carrier or other assistance while moving. To
maximize durability and heat exchange effect of the Shell &
Tube Type Cooler, ensure that the cooler is installed on the
return line, just before the tank, in order to avoid
pressure peaks.
Refer to cooler specifications and use required connection type
of each model.
No.
Qty.
Part Name
Material
No.
Qty.
Part Name
Material
1
1
Floating Cover
Cast Iron
9
1
Plug M14x1,5 with sealring
Steel
2
1
Stationary Cover
Cast Iron
10
1
“Oil Inlet” Sticker (red)
Plastic
3
1
Shell
Alumunium
11
1
“Oil Outlet” Sticker (red)
Plastic
4
1
Tube Bundle
Tubes: Copper
Fins Aluminium
Tube Sheets: Steel
12
1
“Water inlet” sticker (blue)
Plastic
13
1
“Water outlet” sticker (blue)
Plastic
5
1
Gasket - Floating
NBR
14
1
Name Plate
Aluminium
6
1
Gasket - Stationary
NBR
15
16
Washer
Steel FzB
7
2
O-ring
NBR
16
16
Spring Washer
Steel FzB
8
1
Plug M14x1,5 with sealring
Stainless Steel
17
16
Hex socket head
Steel FzB
