46 - PVD3627-August 2011
3.3.2. Frame recommendation
Warning
: The user has the entire responsibility to design and prepare
the support, the coupling device, shaft line alignment., and shaft line
balancing.
Foundation must be even, sufficiently rigid and shall be dimensioned in order to avoid
vibrations due to resonance.
The high-speed motors need a rigid support, machined and of good quality.
The maximum flatness of the support has to be lower than 0.05mm.
To align easily the motor and the load, we recommend adding screws to push the
motor smoothly. Enough screws must be used to move the motor (or the load) in all
directions. At each step of the setting, wedges have to be inserted between the motor
feet and the frame.
Wedges
Wedges
Use screwes
to lift lightly
the motor
Same settings
on others
directions
