5 - PVD3627-August 2011
1. INTRODUCTION
1.1. Purpose and intended audience
This manual contains informations that must be observed to select, install, operate
and maintain Parker MGV high speed Motors. The reader is expected to know the
fundamentals of mechanical, electricity, wiring, electrical components and electrical
schematic components.
Reading and understanding the information described in this document is mandatory
before carrying out any operation on the motors. If any malfunction or technical
problem occurs, that has not been dealt with in this manual, please contact Parker for
technical assistance. In case of missing information or doubts regarding the
installation procedures, safety instructions or any other issue tackled in this manual,
please contact Parker as well.
Parker’s responsibility is limited to the MGV motors and doesn’t encompass the
whole user’s system. Data provided in this manual are for product description only
and may not be guaranteed, unless expressly mentioned in a contract.
DANGER:
Parker declines responsibility for any industrial accident or
material damage that may arise, if the procedures and safety
instructions described in this manual are not scrupulously followed.
1.2. Safety
1.2.1.
For this equipment to work safely, it must be transported, stored, handled, installed
and serviced correctly. Following the safety instructions described in each section of
this document is mandatory. High speed Motors usage must also comply with all
applicable standards, national directives and factory instructions in force.
Principle
DANGER: Non-compliance with safety instructions, legal and technical
regulations in force may lead to physical injuries or death, as well as
damages to the property and the environment.
