MX80L Series Product Manual
Chapter 3 - How to Use the MX80
Parker Hannifin Corporation
Daedal Division
Irwin, Pennsylvania
26
Encoder Specifications
Description Specification
Input Power
5 VDC +/-5% 150 to 220 mA depending on encoder resolution
Output
(Incremental)
E2, E3, E4, E5,
E7, E8, E9
Square wave differential line driver (EIA RS422) 2 channels A and B in
quadrature (90
o
) phase shift.
Reference (Z
Channel)
Synchronized pulse, duration equal to one resolution bit. Repeatability of
position is unidirectional moving toward positive direction and is equal to
table repeatability specifications.
Maximum Speed
5.0 micron resolution = 2.0 meters/sec (limited by table)
1.0 micron resolution = 2.0 meters/sec (limited by table)
0.5 micron resolution = 1.5 meters/sec
0.1 micron resolution = 0.3 meters/sec
20 nanometer resolution = 0.06 meters/sec
10 nanometer resolution = 0.03 meters/sec
Hall Effect Specification
Description Specifications
Input Power
+5 VDC, 30 mA
Output
Open collector, Current Sinking, 20 mA Max
Limit and Home Sensor Specifications
Description Specification
Input Power
+5 VDC 60 mA (power from encoder, no additional connection needed)
Output
Output form is selectable with product:
- Normally Closed Current Sinking
- Normally Open Current Sinking
NPN open col5 to +24 VDC All types Sink maximum of 50 mA
Repeatability
Home Sensor: +/- 5
μ
m (unidirectional) with 1.0 micron or better encoder
NOTE: Repeatability using z-channel refers to encoder specifications
Low ESD Specifications
The low ESD (
E
lectro
S
tatic
D
ischarge) option refers to either an electroless nickel coating on standard
grade tables or an Armoloy® coating on precision grade tables that provides a very low resistance path to
ground from all surfaces of the MX80.
Drive Specifications
Refer to Specifications provided in the ViX Manual.
www.comoso.com
