MX80L Series Product Manual
Appendix
Parker Hannifin Corporation
Daedal Division
Irwin, Pennsylvania
40
Chapter 6 - Maintenance and Lubrication
Cross Roller Bearing Lubrication
Standard Prep:
•
Recommended Lubricant: Mobil Vactra No. 2, oil
•
Lubrication Interval: 1000 hours*
•
Method:
Lightly coat the bearing surfaces with oil. Bearings surfaces can be exposed by moving the table
to the end of travel lubricating the now exposed surfaces, then moving the table to the other end
of travel and lubricating the other set of surfaces.
Warning
Excessive oiling of the bearings--particularly the limit side bearing--can cause unit to
malfunction. Excess oil can damage limit sensor and target.
Clean Room Prep:
•
Recommended Lubricant: Castrol Braycote 803, grease
•
Lubrication Interval: 2000 hours*
•
Method:
Lightly coat the bearing surfaces with grease. Bearings surfaces can be exposed by moving the
table to the end of travel lubricating the now exposed surfaces, then moving the table to the
other end of travel and lubricating the other set of surfaces.
Warning
Excessive greasing of the bearings--particularly the limit side bearing--can cause unit to
malfunction. Excess grease can damage limit sensor and target.
* General notes: Shorter lubrication interval may be required in environments with high amounts of dust and other contamination.
www.comoso.com
