MX80L Series Product Manual
Chapter 1 - Introduction
Parker Hannifin Corporation
Daedal Division
Irwin, Pennsylvania
7
Return Information
Returns
All returns must reference a “
R
eturn
M
aterial
A
uthorization”
(RMA)
number. Please call your local
authorized distributor or Daedal Customer Service Department at 800-245-6903 to obtain a “RMA”
number. See Daedal Catalog #8083/USA, for additional information on returns and warranty.
Repair Information
Out-of-Warranty Repair
Our Customer Service Department repairs Out-of-Warranty products. All returns must reference a “RMA”
number. Please call your local authorized distributor or Daedal Customer Service Department at 800-
245-6903 to obtain a “RMA” number. You will be notified of any cost prior to making the repair.
Warnings and Precautions
Hot Surfaces
DO NOT touch linear motor coils located in the base of the MX80, (see page 8,
Assembly Diagram
, for
component location), after high duty operation. Motor temperature may approach 125 C. The unit itself
may become warm or hot to the touch.
Electrical Shock
DO NOT take apart or touch any internal components of the positioner while unit is plugged into an
electrical outlet. SHUT OFF power before replacing components to avoid electrical shock.
High Magnetic Field
Unit may be HAZARDOUS to people with Pace Makers or any other 'magnetically-sensitive' medical
devices. Unit may have an effect on 'magnetically-sensitive' applications.
Ferrous Materials
The positioner's open design WILL ATTRACT ferrous materials. The customer must take additional
precautions in these applications to keep positioner free of these highly magnetic particles.
Vertical Operation
The MX80L is NOT recommended for vertical operation unless it is configured with the pneumatic assist
option. If the pneumatic assist is not used, the carriage and customer's load will fall in power loss
situations potentially causing product or load damage or personal injury.
General Safety
Because linear motors can accelerate up to 5 g's, and sometimes positioners move without warning,
keep all personnel away from dynamic travel range of positioner.
www.comoso.com
