K3.1.114o Manual NitroFlow Mobile
- 22 -
6.3.4 Options
menu
Access:
Press option menu button
in settings screen (refer to §6.3)
Function:
Set different options
ATTENTION:
All options are default set to NO. Options do not affect the output and purity.
Button Selection
Result
Auto R.
Yes
After a power failure the unit will automatically restart itself and
return to the same situation/status.
Auto R.
No
After a power failure the unit will not start automatically. Unit
needs to be restarted manually.
Remote
Yes
Unit can be switch on and off from a remote location. Only
select
Yes
after connecting the printed circuit board to an
external device.
Remote
No
Unit cannot be controlled from a remote location.
Pincode
Yes
Settings are instantly protected with a pin code. Return to
log
on menu
and enter the
default pin code 1234
.
Pin code
No
Settings can be changed without a pin code
Pin code
Change
Pin code can be changed to a personal 4 digits code.
(In case
you forget your personal code, consult your supplier)
Show Flow
Yes
Flow rate will be displayed in main screen
Show Flow (D)
No
Flow rate will not be displayed.
Operate to adjust date and time
6.3.5
Local settings menu
Access:
Touch local settings menu button
in settings screen
(refer to § 6.3)
Function:
Set data to local requirements
Depending on the local situation it is possible to change the setting accordingly.
Summary of Contents for NitroFlow Basic Series
Page 32: ...K3 1 114o Manual NitroFlow Mobile 31 10 Electrical scheme...
Page 33: ...K3 1 114o Manual NitroFlow Mobile 32 11 Declaration of Conformity...
Page 34: ...NOTES...
Page 35: ......
