11
12
Parker Hannifin Corporation
|
Pump & Motor Division
|
Kings Mountain, NC
Parker Hannifin Corporation
|
Pump & Motor Division
|
Kings Mountain, NC
WARNING:
This product can expose you to chemicals including lead or DEHP which are known to the state of California to cause cancer,
birth defects, and other reproductive harm. www.p65warnings.ca.gov
WARNING:
This product can expose you to chemicals including lead or DEHP which are known to the state of California to cause cancer,
birth defects, and other reproductive harm. www.p65warnings.ca.gov
Catalog HY13-PMD500-SM/US
PGP/PGM 500 Series
Gear Pumps & Motors Service Manual
Assembly Instructions
1)
Before start, clean all machined surfaces and make
sure are free of debris.
2)
Prep new lip seal for replacement (
Fig. 1
).
3)
Grease new lip seal (
Fig. 2
). Coat the outer edge
of the lip seal and its recess with non-hardening
sealant or equivalent before replacing.
4)
Replace lip seal (
Fig. 3 & 4
). With the metal side of
the lip seal up, press it into the mounting flange side
of the shaft end cover with an arbor press and bar
(see Tool List on
the lip of the seal.
Press in until flush with the recess. Wipe off excess
sealant.
Start Assembly
Figure 1
Figure 2
Figure 3
Figure 4
