18
Tubemarkers
The tubemarker (Figure 8) is a mandatory part of the process to properly assemble Phastite
®
. It ensures adequate
tube insertion and aids with inspecting for correct assembly. Proper tube insertion is essential.
To achieve proper tube insertion, a range of Phastite
®
tubemarkers are available. The Phastite
®
tubemarkers create
two visible lines along the outside diametre of the tube. While rotating the tubemarker around the tube. enough
pressure should be applied to create two visible lines. The lines are easily visible once the tube has been removed
from the tubemarker. The tubemarker selected is dependent on the tubing O.D. and not the material.
Figure 8
Table 10
Tubemarker Part Numbers
Tube marker part numbers are as follows:
PH-#-TUBEMARKER
The # must be replaced with the tube size as follows:
See Table 10 for reference. Example: PH-4-TUBEMARKER
PH
4
TUBEMARKER
Series
Tube Size
Item
PH
Imperial
1/4”
4
TUBEMARKER
3/8”
6
1/2”
8
5/8”
10
3/4”
12
1”
16
Metric
6mm
M6
10mm
M10
12mm
M12
16mm
M16
20mm
M20
25mm
M25
Summary of Contents for Phastite PH-10-4N-TMS
Page 1: ...Phastite Tube Connectors Installation Manual BULLETIN 5909...
Page 33: ...41 42 Notes Notes...
Page 34: ......
