179560600 Rev1
Page
3
of
21
1
INTRODUCTION
The Instructions for Use (IFU) contain important information covering installation, operation and maintenance
for liquid and gas filter housings, including important safety and handling information. These instructions should
be retained to provide guidance on the safe use of the equipment.
Please read and understand this manual prior to de-crating and installation.
This document applies to Parker supplied ranges with the following housing ranges (Table 1)
Filter Housing Range
Fluid (PED Group)
PHB Demi
Gas (Group 1 & 2)
PHS Demi
Gas (Group 1 & 2)
PHB Single
Gas (Group 2)
PHS Single
Gas (Group 2)
PHI (In Line)
Liquid & Gas (Group. 2)
PHV (Vent)
Gas (no PED)
PHW Single
Liquid (Group 1 & 2)
PHW Multi
Liquid (Group2)
PHF Demi
Liquid & Gas (Group 1 & 2)
PHP
Liquid & Gas (Group 2)
PHL
Liquid & Gas (Group 1 & 2)
Table 1
User Safety Responsibility Statement for All Parker Products
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED
ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized
distributors provide product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the
system and components and assuring that all performance, endurance, maintenance, safety and warning
requirements of the application are met. The user must analyse all aspects of the application, follow
applicable industry standards, and follow the information concerning the product in the current product
catalogue and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options
based upon data or specifications provided by the user, the user is responsible for determining that such data
and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the
components or systems.
