28
5.2 PC HyperTerminal Settings:
SciTemp
®
Temperature Monitor to PC:
PC communications via the Serial Port labeled “Printer
/ PC” requires a SciTemp
®
RS-232 Cable. NOTE: When you are not using the SciTemp
®
printer, this allows process data to be “dumped” into your PC for archiving. The list of settings
below must match those in Serial section of the SciTemp
®
Temperature Sensor main menu.
The following terminal setting procedure is intended for PCs with a
Windows 95/98/XP
software
installation: Press the
START
button in the lower left corner of your screen, select
“All
Programs”
then select and open
“Accessories”,
select
“HyperTerminal”,
double-click at the
Hyper Terminal icon.
1.
From
the
“Connection Description”
screen, select an icon and enter a file name, i.e.
SciTemp
®
Temperature Sensor.
Press “Ok”
2.
From
the
“Phone Number”
screen, select
“Direct to Com 1”
in the box labeled
Connect Using:
or select any other available Com port.
Press “Ok”
3.
From
the
“Com 1 Property”
screen, select the following parameters
Bits per Second:
9600
Data Bits:
8
Parity:
None
Stop Bits:
1
Flow Control:
None
Press “Ok”
1.
Go
to
“File”
and open
“Properties”,
from the
“SciTemp
®
Temperature Sensor
Property”
screen, select the
“Setting”
screen, enter the following:
Terminal Keys:
Select
Emulation:
TTY
Backscroll Buffer:
500
While still in the
“Setting”
screen, press
“ASCII Setup”
key & select the following from
the “
ASCII Setup”
screen:
Send Line Ends with Line Feed:
Select
Echo Typed Characters Locally:
Select
Line Delay:
10 msec.
Character Delay:
10 msec
Append Line Feeds….....:
No Selection
Force Incoming…............:
No Selection
Wrap Lines That Exceed …..:
Select
Press “Ok”
at the bottom of the “SciTemp
®
Temperature Sensor Setup” screen.
Press “Ok”
at the bottom of the “SciTemp
®
Temperature Sensor Property – Setting”
screen
Summary of Contents for SciLog SciTemp
