page 18 of 21
6
Technical Data
Version
Digital pressure gauge with
ACT
-
MIN
and
MAX Display
bar graph display (33 segments) with peak and hold function
4 ½ digit LC display (15 mm) with back light illumination
Battery powered with low power electronic system
Life time cycle 800 h (No back light function)
Pressure port stainless steel 1.4404
¼” BSPP (ISO 1179-2) or 7/16 – 20 UNF (ISO 11926-2/3)
Input
Ceramic Sensor cell
-1…16 bar
Strain Gauge Cell
0…100/400/600/1,000 bar
Scan rate 10 ms
Accuracy
0.25 % FS typ.
0.5 % FS max.
Resolution 12 bit = 4,096 steps
Housing
Ø
= 79 mm; T = 33 mm
Zinc Die Cast with Rubber Protection TPE
Weight (g)
540
Sealing
Standard NBR sealed
Viton
®
(FKM); EPDM on request
Parts in contact with media
Stainless Steel 1.4404, NBR, ceramics
Power Supply
Battery 2 x 1,5 VDC AA (LR6) Alkaline (Mignon)
Ambient conditions
Ambient temperature
Storage temperature
Fluid temperature
Rel. humidity
Protection
Vibration
Shock
-10…50 °C
-20…+60°C
-20…+80°C
< 85%
EN 60529 (IP 54)
IEC 60068-2-6
5g
IEC 60068-2-27 25g
Function
Units: bar; PSI; Mpa; kPa; mbar
MIN/MAX - Full Scale
Battery Status Control
Auto Power Off/On
Zero Function
Reset (Deletes MIN/MAX )
PC Funktion
PC Software "JuniorWin"
Download recorded data's
via wireless PC Interface (2,4 GHz) Range 50 m
Device Setup
Memory Function
5,000 Readings (MAX Readings)
Setup of Memory Interval
REC TIME (Time based recording)
REC AUTO (Long Term Recording by Limit Monitoring)
