5 - PVD 3622_GB_TM_January 2014.Docx
1.
INTRODUCTION
1.1. Purpose and intended audience
This manual contains information that must be observed to select, install, operate and
maintain PARKER TM Torque Motors.
Installation, operation and maintenance of the equipment should be carried out by qualified
personnel. A qualified person is someone who is technically competent and familiar with all
safety information and established safety practices; with the installation process, operation
and maintenance of this equipment; and with all the hazards involved.
Reading and understanding the information described in this document is mandatory
before carrying out any operation on the motors. If any malfunction or technical problem
occurs, that has not been dealt with in this manual, please contact PARKER for technical
assistance. In case of missing information or doubts regarding the installation procedures,
safety instructions or any other issue tackled in this manual, please contact PARKER as
well.
PARKER
’s responsibility is limited to its torque motors and does not encompass the
whole user’s system. Data provided in this manual are for product description only and
may not be guaranteed, unless expressly mentioned in a contract.
DANGER: PARKER declines responsibility for any industrial accident or
material damage that may arise, if the procedures and safety instructions
described in this manual are not scrupulously followed.
1.2. Safety
1.2.1.
Principle
To operate safely, this equipment must be transported, stored, handled, installed and
serviced correctly. Following the safety instructions described in each section of this
document is mandatory. Torque Motors usage must also comply with all applicable
standards, national directives and factory instructions in force.
DANGER: Non-compliance with safety instructions, legal and technical
regulations in force may lead to physical injuries or death, as well as
damages to the property and the environment.
Summary of Contents for TM Series
