HY13-1526-001-M1/US
Torqmotor™ Service Procedure
TC, TS, TB, TE and TJ Series
Parker Hannifin Corporation
Hydraulic Pump/Motor Division
Greeneville, TN 37745 US
41
Assemble
commutator ring
13. Assemble the commutator ring (5) over
alignment studs onto the manifold. SEE
FIGURE 48. After June 2012, add seal ring
to commutator ring.
Figure 48
Figure 49
Figure 50
Torqmotor™ Assembly
Assemble
seal &
commutator
14. Assemble a
new
commutator
seal ring (3)
flat side up, into commutator (5) and assem-
ble commutator over the end of drive link (9)
onto manifold (6) with seal ring side up.
SEE FIGURE 49.
Assemble shuttle
valve parts into
end cover
15. If shuttle valve components items #23,
#24, #25 were removed from the end cover
(2) turn a plug (23) with a
new
o-ring (20),
loosely into one end of the valve cavity in
the end cover. Insert a spring (25) the valve
(24) and the second spring (25) into the
other end of the valve cavity. Turn the sec-
ond plug (23) with a
new
o-ring (20) loosely
into the end cover valve cavity. 3/16 inch
Allen wrench required. SEE FIGURE 50.
