background image

179550500 Rev 2 

Page 

3

 of 

13

 

 

 

 

1

 

INTRODUCTION 

The Instructions for Use (IFU) contain important information covering installation, operation and maintenance 
for  gas  filter  housings,  including  important  safety  and  handling  information.    These  instructions  should  be 
retained to provide guidance on the safe use of the equipment.    

Please read and understand this manual prior to de-crating and installation.  

This document applies to Parker supplied ranges with the following the code structures: 

 

 

 

 

User Safety Responsibility Statement for All Parker Products 

 
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED 
ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. 
 

This  document  and  other  information  from  Parker-Hannifin  Corporation,  its  subsidiaries  and  authorized 

distributors provide product or system options for further investigation by users having technical expertise. 
 

The  user, through  its  own  analysis  and  testing,  is solely  responsible  for  making  the  final  selection  of  the 
system and  components  and assuring that all  performance, endurance,  maintenance,  safety and warning 
requirements  of  the  application  are  met.    The  user  must  analyse  all  aspects  of  the  application,  follow 
applicable  industry standards,  and  follow  the  information  concerning  the  product  in  the  current  product 

catalogue and in any other materials provided from Parker or its subsidiaries or authorized distributors. 
 
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options 

based upon data or specifications provided by the user, the user is responsible for determining that such data 

and  specifications  are  suitable  and  sufficient  for  all  applications  and  reasonably  foreseeable  uses  of  the 
components or systems. 
 

 

 

 

 

 

Summary of Contents for VBA-2B














Reviews: