39
38
STOPPING THE ENGINE
MAINTENANCE
• The exhaust gets extremely hot during use, hot surfaces will burn fingers or palms.
• When storing the Blower / Vacuum for long periods ensure all fuel is drained from the machine.
• Storing a machine with a hot exhaust near anything flammable is extremely dangerous!
WARNING!
•
LET THE ENGINE COOL.
Allow the engine to cool by running it at idle for 2 or 3 minutes.
•
TURN THE POWER OFF.
Press the
ON/OFF
switch into the
'OFF'(O)
position. This will stop the
engine. The switch is spring loaded and will return to the default
'ON'(I)
position.
•
NEVER ATTEMPT TO REFUEL A HOT ENGINE!
Always allow the Vacuum / Blower engine to cool before refuelling!
•
NEVER
STORE A MACHINE WITH A HOT EXHAUST!
Always allow the exhaust to cool before storing and transporting.
Storing a machice with a hot exhaust near anything flammable is
extremely dangerous!
1
STOPPING THE ENGINE
• Never touch the coil pack/spark plug when the machine is running as there is a risk of electric shock.
WARNING!
SET SPARK PLUG GAP
1
SET THE SPARK PLUG
GAP BETWEEN
0.5mm - 0.7mm
SPARK PLUG MAINTENANCE
•
Once the engine has cooled, twist off the spark plug
cover/coil pack lead.
•
Carefully remove the spark plug using the spark plug
wrench supplied.
•
Clean the spark plug with a wire brush (not supplied) to
remove any deposits.
•
Using a feeler gauge set the gap between 0.5 of 0.7mm.
•
Install the spark plug carefully by hand being careful not
to cross the threads.
•
After the spark plug is seated correctly, tighten with the
wrench supplied.
