WELD SPOTS
Insert the assembled Ball Mount
into the Hitch and lock as normal.
Make sure the
Weld Spots
on
the Hitch Ball are pointed towards
the
rear left side of your trailer
at about 10 o’clock.
The hitch may not lock if they
are not positioned properly!
HITCH BALL
PLACEMENT
HITCH CONNECTION
Turn the Ball Mount
Counter Clockwise
until the gap between
the Ball Mount Collar and Trailer Tongue closes
tightly
, with
no gap
.
FLUSH,
FLAT,
TIGHT,
NO GAP
Have a
Step Down Hitch
or another
obstruction preventing a flat connection?
SEE THRUST WASHER INSTALLATION.
