29
SAFETY RULES & PRECAUTIONS
WARNING
CAUTION
Before using the product
，
Please Confirm the local laws and regulations no limit to this kind of
product .Or the product can meet the requirements of local laws and regulations.
Proper safety precautions must be observed. Like all power equipment this unit must be handled
carefully.
DO NOT EXPOSE YOURSELF OR OTHERS TO DANGER Follow these general rules.
Do not permit others to use this machine unless they are thoroughly responsible and have read, and
understand the machine manual and are trained in its operation.This machine is not to be operated
by children.
z
Always wear safety goggles for eye protection. Dress properly , do not wear loose clothing or
jewelry that could become caught in moving parts of the unit. Safe, sturdy, nonskid footwear
should always be worn. Long hair should be tied back. It is recommended that legs and feet be
covered to protect from flying debris during operation.
z
Before using and after dropping or other impacts,inspect the entire machine for loose parts
(nuts, bolts, screws, etc.) and any damage. Repair or replace as necessary.
z
DO NOT USE any attachment with this power head other than the ones recommended by our
company. Serious injury to the operator or bystanders could result as well as damage to the
machine.
z
Keep the handles free from oil and fuel.
z
Always use proper handles and shoulder strap when cutting.
z
Do not smoke while mixing fuel or filling tank.
z
Do not mix fuel in an enclosed room or near open flames. Ensure adequate ventilation.
z
Always mix and store the fuel in a properly marked container that is approved by local codes
and ordinances for such usage.
z
Never remove the fuel tank cap while the engine is running.
z
Never start or run the engine inside a closed room or building. Fumes from the exhaust contain
dangerous carbon monoxide.
z
Never attempt to make engine adjustments while the unit is running and strapped to the
operator. Always make engine adjustments with the unit resting on a flat, clear surface.
z
Do not pull on the cable.
z
Do not lift the machine other than by the handle of the shaft.
z
Do not rest the machine on the ground while the engine runs (e.g.in idling).
z
Regular check for damages,failing of parts,component or cables.
z
Do not use the unit if it is damaged or poorly adjusted. Never remove the machine's guard.
Serious injury to the operator or bystanders could result as well as damage to the machine.
z
Inspect the area to be cut and remove all debris that could become entangled in the nylon
cutting head. Also remove any objects that the unit may throw during cutting.
z
Keep children away. Onlookers should be kept at a safe distance from the work area,
at least 15
METER(50 FEET).
