30
z
Never leave the machine unattended.
z
Do not use this unit for any job other than those for which it is intended as described in this
manual.
z
Do not overreach. Keep proper footing and balance at all times. Do not run the unit while
standing on a ladder or on any other unstable footing location.
z
Keep hands and feet clear of the nylon cutting head while unit is in use .
z
Do not use this type of machine for sweeping away debris.
z
Do not use the unit when you are tired, ill or under the influence of medication, drugs or
alcohol.
z
Use nylon cutting head which is free of damage. If a stone or any other obstacle is hit, stop the
engine and check the nylon cutting head. A broken or unbalanced nylon cutting head must
never be used.
FOLLOW INSTRUCTION FOR CHANGING ACCESSORIES.
z
Do not store in a closed area where fuel vapors can reach an open flame from hot water heaters,
heaters, furnaces, etc. Store in a locked, well ventilated area only.
z
Ensure safe and proper performance of your product. These part are available from your dealer.
The use of any other accessories or attachments may cause a potential hazard or injury to the
user, damage to the machine and void this warranty.
z
Clean the machine completely, especially, the fuel tank, its surroundings, and the air cleaner.
z
When refueling, be sure to stop the engine and confirm that it is cooled down. Never refuel
when the engine is running or hot. When gasoline spills, be sure to wipe it up completely and
properly dispose of those materials before starting the engine.
z
Stay clear of other workers or bystanders by at least 15 meters /50 feet.
z
When ever approaching an operator of the machine, carefully call his attention and confirm that
the operator stops the engine. Be careful not to startle or distract the operator which can cause
an unsafe situation.
z
Never touch the nylon cutting head when ever the engine is running. If it is necessary to adjust
the protector or nylon cutting head, be sure to stop the engine and confirm that the nylon
cutting head has stopped running.
z
The engine should be turned off when the machine is moved between work areas.
z
Be careful not to hit the nylon cutting head against stones, or the ground.
z
Unreasonable rough operation will shorten the life of the machine as well as create an unsafe
environment for yourself and those around you.
z
Pay attention to loosening and overheating of parts. If there is any abnormality of the machine,
stop operation immediately and check the machine carefully. If necessary, have the machine
serviced by a authorized dealer. Never continue to operate a machine which may be
malfunctioning.
z
In start-up or during operation of the engine, never touch hot parts such as the muffler, the high
voltage wire or the spark plug.
z
After the engine has stopped, the muffler is still hot. Never place the machine in any places
where there are flammable materials (dry grass, etc.), combustible gasses or combustible
liquids.
z
Pay special attention to operation in the rain or just after the rain as the ground may be slippery.
z
If you slip or fall to the ground or into a hole, release the throttle lever immediately.
