44
FUEL
&
OIL MIXTURE
z
Never fill the fuel tank to the very top.
z
Never add fuel to the tank in a closed non-ventilated area.
z
Do not add fuel to this unit close to an open fire or sparks.
z
Be sure to wipe off spilled fuel before attempting to start engine.
z
Do not attempt to refuel a hot engine
Fuel used for this model is a mixture of unlead gasoline and approved engine lubricant. When
mixing gasoline with two-cycle engine oil, use only gasoline which contains NO ETHANOL or
METHANOL(Types of Alcohol) Use Branded 89 octane or higher unlead gasoline known to be of
good quality. This will help to avoid possible damage to engine fuel lines and other engine parts.
OIL-1 PART
MIXTURE RATIO IS 30:1
GASLINE
30 PART GASLINE-30PART -----
OIL-1 PART
Fuel mixture at the rate other than 30:1 may cause
damage to the engine,Ensure mixture ratio is correct.
FUEL
The engine uses two-stroke fuel, a mixture of gasoline and 2-stroke lubricant 30:1
GASOLINE
Use branded 89 octane or higher unlead gasoline known to be of good quality.
STORING FUEL
Store fuel only in a clean,safe,aprroved container. Check and follow local ordinances on type and
location of storage container.
IMPORTANT
Two-stroke fuel may separate.Shake fuel container thoroughly before each use.
Stored fuel ages. Do not mix more fuel than you expect to use within a month.
FUEL AND OIL MIXTURE
Inspect fuel tank making sure that it is clean and fill with fresh fuel. Use a mixture of 30:1.