15 | Page
www.parklio.com | info@parklio.com | +385977247276
Hercegovacka 78, 21 000 Split | Commercial Court in Split | MBS: 060323069 | Raiffeisen Bank,
Zagreb, Petrinjska 59 | IBAN: HR7724840081107194017 | VAT: HR60755958894
PARKLIO SMART PARKING BARRIER
USER MANUAL
4.6 PUTTING THE BARRIER IN OPERATION
Step 1 - CONNECTING THE BATTERY BOX
Before connecting battery box [Figure 6] to the electronic box [Figure 3], it is necessary for the
barrier to be installed to desired spot on the ground like described in the section 4.4 above.
Unlock the case with the supplied key and connect the battery box [Figure 6] and electronics
box [Figure 3] cables inside the case. The boxes should be aligned vertically and horizontally
one to the another.
Please, check on the battery box that the cap on the charging port is
closed!
Step 2 - CLOSING THE COVER
Place the barrier cover over the housing so the cover matches with the slot in the base and
lock the cover by pushing in the lock.
CHECK THAT THE CABLE DOESN’T NOT PROTRUDE UNDER THE COVER!
Figure 13 - Connection of the power supply