12
Press the “PIP” button to view two video sources which can be displayed on the screen at the
same time.
3.12 Motion Detection
Setting Motion Detection restricts your camera to recording only when it senses motion. To
enable motion detection ensure the DVR is not recording, press the “MENU” button on the
remote to enter the settings menu, press “MODE” to switch to “SETTING” menu, use “UP” and
“DOWN” to switch to “MOTION DETECTION” press the “REC” button to enter and use “UP” and
“DOWN” to select “ON” or “OFF” motion detection. Press the “REC” button exit and confirm your
settings.
3.13 G-sensor and sensitivity
When the DVR detects strong sudden movement (eg during an accident or incident) it can
automatically save the current video and ensure it can’t be overwritten for later viewing. These
video files will be saved on the Micro SD card and will not be deleted or overwritten by loop
recording.
Note:
Your Micro SD card can only save fifteen G-sensor files. When G-sensor files reach more
than 15, the DVR will begin to write over the oldest files, keeping the most recent 15 G-sensor
saved incidents.
To enable G-sensor recording, ensure the DVR is not recording, press the “MENU” button on the
remote to enter the settings menu, press “MODE” to switch to “SETTING” menu, use “UP” and
“DOWN” to switch to “G-sensor”, press “REC” to enter and use “UP” and “DOWN” to buttons to
select G-sensor sensitivity or turn off G-sensor.
Forward camera video
Forward & reverese video displayed
Forward camera video
Reverese camera video
