4
some problem because the speed of the card is too fast, it is better not to use class 10 card )
2.2 Turning on your recorder
Press Power button to turn the power on/off. Or connect to the car charger ,it will turn on when the car starts .
2.3 Take a picture
Taking a still picture
1. On recording , Long press "OK" button and take a picture
2. On stand by ,Long press "OK" button and take a picture
2.4 Reviewing the pictures
1. Long press "Down" button and into Movie reviewing ,then long press "Down" button again and then you can
review the pictures.
2.Then long press "up" button for picture settings : delete file/ protect file/auto play/copy to another card/ choose
card
3. Press "OK" button to confirm.
4. Long press "Down" button to go back
2.5 Before using
Before using the recorder, it is necessary to do some basic settings such as Date and Time, Language and Beep
Tone .etc
2.5.1 Setting Date and Time
Power on the camcorder. Press Menu (Long press up button ) ,then press up and down button to choose
Date and Time and press OK button to confirm .
2.5.2 Setting Language
Power on the camcorder. Press Menu (Long press up button ) ,then press up and down button to choose
language and press OK button to confirm .
2.5.3 Loop setting
Off/1minutes/3minutes/5minutes
1. On / off mode,
a. The device will not auto re-write if this setting is OFF and will just record video until the card is full
and then stop, it is always better to choose 1-3-5 minute option.
maximum length of each recorded video file is 3.66G. When it reaches the maximum, the recording is automatically split and
saved as another file.
2.When the loop setting mode is "1 min","3min",5min"
a. Power on , the device will record
automatically
b.if the space is full, the previous saved file will be automatically overwrite.
