Removing the battery pack:
1. Press the release button
2
and remove the
battery pack
4
.
Q
Charging the battery pack
NOTE
u
The battery pack
4
comes partly charged.
Charge the battery pack
4
prior to first use,
ideally at least 90 minutes.
u
Always pull out the plug of the charger
13
from the mains before removing or connecting
the battery pack
4
to the charger.
u
Never charge the battery pack
4
when
the ambient temperature is below 10 °C or
above 40 °C.
u
Rest the charger
13
for at least 15 minutes
between successive charging sessions.
u
If no battery pack
4
is inserted into the
charger
13
and the charger is connected to
mains, the charging status LED
15
lights up
green.
1. Connect the battery pack
4
to the battery
charger
13
.
2. Insert the mains plug into the socket. The
charging status LED
14
lights up red.
Once the battery pack
4
is completely
charged, the green charging status LED
15
indicates that the charging process is complete.
3. Disconnect the charger
13
from the mains
and remove the battery pack
4
from the
charger.
4. Attach the battery pack
4
back to the product.
Charging status LEDs
Green LED lights up
without battery pack
Charger ready
Green LED lights up
with battery pack
Battery pack fully charged
Red LED lights up
with battery pack
Battery pack charging
Red LED flashes with
battery pack
Battery pack defect
Green LED flashes
with battery pack
Battery pack too cold or
warm
Q
Checking the battery level
o
Press the battery level button
1
to check the
charging level of the battery pack
4
. The
charging level will be shown on the battery
level indication light
3
.
3 Red LEDs light up maximum charging level
2 Red LEDs light up medium charging level
1 Red LEDs lights up low charging level
o
Charge the battery pack
4
before operation
when it is at medium or low charging level.
Q
Attaching / removing the
auxiliary handle
NOTE
u
The product must only be operated with the
auxiliary handle mounted.
1. Screw the auxiliary handle
6
, depending
on the type of work, to the left, right or top of
the product using the threads for the auxiliary
handle
11
.
Q
Adjusting the guard
WARNING!
u
Always remove the battery pack from the
product before adjusting the guard in order
to avoid switching it on accidentally.
CAUTION! RISK OF INJURY!
u
Wear protective gloves. Be careful when
gripping and turning the guard due to
potential finger squeezing hazard between
the guard and disc.
NOTE
u
The product must only be operated with the
guard mounted.
14 GB
