Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2.
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose control.
Electrical safety
1.
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
2.
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
3.
Do not expose power tools to rain or
wet conditions.
Water entering a power
tool will increase the risk of electric shock.
4.
Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged or
entangled cords increase the risk of electric
shock.
5.
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.
Use of a cord
suitable for outdoor use reduces the risk of
electric shock.
6.
If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply.
Use of an RCD reduces
the risk of electric shock.
Personal safety
1.
Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication.
A moment of inattention
while operating power tools may result in
serious personal injury.
2.
Use personal protective equipment.
Always wear eye protection.
Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce
personal injuries.
3.
Prevent unintentional starting.
Ensure the switch is in the off
-position before connecting to power
source and/or battery pack, picking
up or carrying the tool.
Carrying
power tools with your finger on the switch or
energising power tools that have the switch
on invites accidents.
4.
Remove any adjusting key or
wrench before turning the power
tool on.
A wrench or a key left attached to
a rotating part of the power tool may result in
personal injury.
5.
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the power tool
in unexpected situations.
6.
Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
7.
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used.
Use of
dust collection can reduce dust-related hazards.
Power tool use and care
1.
Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool will do
the job better and safer at the rate for which it
was designed.
2.
Do not use the power tool if the
switch does not turn it on and off.
Any
power tool that cannot be controlled with the
switch is dangerous and must be repaired.
8 GB
