Parkside Performance 329697 2001, Instructions Manual

PSBSAP 20-Li A1

■ 

4 

│

GB

│

IE

│

NI

WARNING!

►

Depending on the manner in which the power 
tool is being used and, in particular, the kind 
of workpiece being worked, the vibration and 
noise emission values can deviate from the 
values given in these instructions during actual 
use of the power tool.

►

Try to keep the vibration load as low as 
possible. Measures to reduce the vibration 
load are, e.g. wearing gloves and limiting the 
working time. Wherein all states of operation 
must be included (e.g. times when the power 
tool is switched off and times where the 
power tool is switched on but running without 
load).

General power tool 
safety warnings

WARNING!

►

Read all safety warnings, instructions, 
illustrations and specifications provided 
with this power tool.

 Failure to follow all 

instructions listed below may result in electric 
shock, fire and/or serious injury.

Save all warnings and instructions for future 
reference.

The term “power tool” in the warnings refers 
to your mains-operated (corded) power tool or 
battery- 
operated (cordless) power tool.

1.  Work area safety

a)  

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b)  

Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

c)  

Keep children and bystanders away while 
operating a power tool.

 Distractions can  

cause you to lose control.

2.  Electrical safety

a)  

Power tool plugs must match the outlet.  
Never modify the plug in any way.  
Do not use any adapter plugs with earthed 
(grounded) power tools.

 Unmodified plugs 

and matching outlets will reduce risk of electric 
shock.

b)  

Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c)  

Do not expose power tools to rain or wet 
conditions.

 Water entering a power tool will 

increase the risk of electric shock.

d)  

Do not abuse the cord. Never use the cord 
for carrying, pulling or unplugging the power 
tool. Keep cord away from heat, oil, sharp 
edges or moving parts.

 Damaged or entangled 

cords increase the risk of electric shock.

IB_329697_PSBSAP20-LiA1_LB6.indb   4

26.08.20   17:08