■
2
│
GB
│
IE
PBS 600 B1
BELT SANDER PBS 600 B1
Introduction
Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Before using the product, please familiarise
yourself with all operating and safety instructions.
Use the product only as described and for the
specified areas of application. Please also pass on
these operating instructions to any future owner.
Intended use
The belt sander is designed for dry surface sanding
of wood, plastic, metal and plaster and painted
surfaces depending on the sandpaper used. The
appliance may only be used for dry sanding. Please
note that you need to use appropriate sandpapers
with different grains for working different materials,
and that the machine speed must also be adapted
to the material. The appliance is not intended for
commercial use. Any other uses of or modification to
the machine is deemed to be improper and carries
the risk of serious personal injury. The manufacturer
accepts no responsibility for damage(s) attributable
to misuse.
Depicted components
Openings for screw clamps
Setting wheel for belt speed
Handle (rubberised grip)
Locking button for ON/OFF switch
ON/OFF switch
Dust box
Adjusting screw for belt tracking
Abrasive belt
Additional handle (rubberised grip)
External extraction adapter
Reducer
Adapter fitting
Clamping lever for abrasive belt
Screw clamp
Package contents
1 belt sander PBS 600 B1
1 abrasive belt (grain size 80)
1 dust box
1 extraction adapter and reducer (for external dust
extraction)
2 screw clamps
1 set of operating instructions
Technical data
Rated voltage:
230 V ∼ 50 Hz
(alternating current)
Rated power consumption: 600 W
Idling belt speed:
170–250 m / min
Rated idling speed:
n
0
360–560 rpm
Abrasive belt:
75 x 457 mm
Protection class:
II / (double insulation)
Noise emission value:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level:
L
pA
= 87.29 dB (A)
Uncertainty:
K
pA
= 3 dB
Sound power level:
L
WA
= 98.29 dB (A)
Uncertainty:
K
WA
= 3 dB
Wear hearing protection!
Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Vibration emission value: a
h
= 1.901 m/s
2
Uncertainty K = 1.5 m/s
2
Summary of Contents for 275647
Page 3: ...A B C 10 11 13 14 12 ...
Page 45: ... 42 PL PBS 600 B1 ...
