Parkside 285125, Translation Of The Original Instructions

PAH 1300 A1

GB

│

IE

│

NI

│

CY

│

 3

■

NOTE

►

The vibration level specified in these instruc-
tions has been measured in accordance with 
a standardised measuring procedure and can 
be used to make equipment comparisons. The 
specified vibration emission value can also 
be used to make an initial exposure estimate.

 WARNING!

►

The vibration level varies in accordance with 
the use of the power tool and may be higher 
than the value specified in these instructions 
in some cases. Regular use of the electric 
tool in such a way may cause the user to 
underestimate the vibration. Try to keep the 
vibration loads as low as possible. Measures 
to reduce the vibration load are, e.g. wearing 
gloves and limiting the working time. Wherein 
all states of operation must be included (e.g. 
times when the power tool is switched off and 
times where the power tool is switched on but 
running without load).

 General 

Power Tool  
Safety Warnings

 WARNING!

►

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions 
may result in electric shock, fire and/or 
serious injury.

Save all warnings and instructions for future 
reference.

The term "power tool" in the warnings refers to your 
mains-operated (corded) power tool or battery- 
operated (cordless) power tool.

1.  Work area safety

a)  

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b)  

Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable 
liquids, gases or dust.

 Power tools create sparks 

which may ignite the dust or fumes.

c)  

Keep children and bystanders away while 
operating a power tool.

 Distractions can cause 

you to lose control.

2.  Electrical safety

a)  

Power tool plugs must match the outlet.  
Never modify the plug in any way.   
Do not use any adapter plugs with earthed 
(grounded) power tools.

 Unmodified plugs and 

matching outlets will reduce risk of electric shock.

b)  

Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c)  

Do not expose power tools to rain or wet 
conditions.

 Water entering a power tool will 

increase the risk of electric shock.

d)  

Do not abuse the cord. Never use the cord 
for carrying, pulling or unplugging the power 
tool. Keep cord away from heat, oil, sharp 
edges or moving parts.

 Damaged or entangled 

cords increase the risk of electric shock.

e) 

 When operating a power tool outdoors, use 
an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces 
the risk of electric shock.

f)  

If operating a power tool in a damp location 
is unavoidable, use a residual current device 
(RCD) protected supply.

 Use of an RCD reduces 

the risk of electric shock.

3.  Personal safety

a)  

Stay alert, watch what you are doing and 
use common sense when operating a power 
tool. Do not use a power tool while you are 
tired or under the influence of drugs, alcohol 
or medication.

 A moment of inattention while 

operating power tools may result in serious 
personal injury.