Parkside 285125, Translation Of The Original Instructions

PAH 1300 A1

■ 

4 

│

GB

│

IE

│

NI

│

CY

b)  

Use personal protective equipment. Always 
wear eye protection.

 Protective equipment such 

as dust mask, non-skid safety shoes, hard hat, 
or hearing protection used for appropriate 
conditions will reduce personal injuries.

c)  

Prevent unintentional starting. Ensure the 
switch is in the off position before connecting 
to power source and/or battery pack, picking 
up or carrying the tool.

 Carrying power tools  

with your finger on the switch or energising 
power tools that have the switch on invites  
accidents.

d)  

Remove any adjusting key or wrench before 
turning the power tool on.

 A wrench or a key 

left attached to a rotating part of the power tool 
may result in personal injury.

e)  

Do not overreach. Keep proper footing and 
balance at all times.

 This enables better control 

of the power tool in unexpected situations.

f)  

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair, clothing and gloves 
away from moving parts.

 Loose clothes, jew-

ellery or long hair can be caught in moving 
parts.

g)  

If devices are provided for the connection of 
dust extraction and collection facilities, ensure 
these are connected and properly used.

Use of dust collection can reduce dust-related 
hazards.

4.  Power tool use and care

a)  

Do not force the power tool. Use the correct 
power tool for your application.

 The correct 

power tool will do the job better and safer at 
the rate for which it was designed.

b)  

Do not use the power tool if the switch does 
not turn it on and off.

 Any power tool that can-

not be controlled with the switch is dangerous 
and must be repaired.

c)  

Disconnect the plug from the power source 
and/or the battery pack from the power tool 
before making any adjustments, changing 
accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of 
starting the power tool accidentally.

d)  

Store idle power tools out of the reach of 
children and do not allow persons unfamiliar 
with the power tool or these instructions to 
operate the power tool.

 Power tools are dan-

gerous in the hands of untrained users.

e)  

Maintain power tools. Check for misalignment 
or binding of moving parts, breakage of parts 
and any other condition that may affect the 
power tool’s operation. If damaged, have the 
power tool repaired before use.

 Many acci-

dents are caused by poorly maintained power 
tools.

f)  

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting 
edges are less likely to bind and are easier to 
control.

g)  

Use the power tool, accessories and tool bits 
etc. in accordance with these instructions,  
taking into account the working conditions 
and the work to be performed.

 Use of the 

power tool for operations different from those 
intended could result in a hazardous situation.

5.  Service

a)  

Have your power tool serviced by a qualified 
repair person using only identical replacement 
parts.

 This will ensure that the safety of the 

power tool is maintained.

Appliance-specific safety instructions 
for hammers

■

 Wear hearing protection.

 The effect 

of noise can lead to hearing loss.

■

Use the additional handles supplied with the 
appliance.

 Loss of control can lead to injuries.

■

Hold the appliance by the insulated handles 
when you are carrying out work during which 
the deployed tool may come into contact with 
concealed power cables or its own power 
cable.

 Contact with a "live" wire may make ex-

posed metal parts of the power tool "live" and 
could give the operator an electric shock.

■

 Wear a dust mask.