PFBS 160 B2
■
14
│
GB
│
IE
│
NI
│
CY
■
Observe the data and the information in the
table to prevent the end of the spindle from
touching the perforated base of the grinding
tool.
Flexible shaft
■
Never operate the spindle lock while the motor
is running. Otherwise the appliance or the
flexible shaft could be damaged.
♦
Unscrew the union nut anticlockwise off the
appliance and store it carefully.
♦
Press the spindle lock and hold it down.
♦
Screw the tensioning nut anticlockwise off
the appliance.
♦
The shaft needs to be pulled out a short distance
as it cannot be fixed into the collet chuck ,
otherwise.
♦
Fit the flexible shaft onto the appliance. To
do this, the internal access of the flexible shaft
push the tensioning nut into the collet chuck
, .
♦
Press the spindle lock and hold it down.
♦
Now, tighten the tensioning nut using the
combination spanner .
Now, screw the union nut
14b
of the flexible
shaft clockwise onto the appliance.
♦
Place the desired accessory into the collet
chuck , of the flexible shaft.
♦
To lock the spindle, push the spindle lock
back onto the flexible shaft.
♦
Use the combination spanner to undo the
tensioning nut on the flexible shaft.
Fit the accessory and retighten the tensioning
nut .
Stand for the multi-tool
♦
Screw the stand into the clamping assembly
.
NOTE
►
Depending on the desired attachment onto a
vertical or horizontal surface, you can screw
the stand into the clamping assembly in
two different positions.
♦
Screw the clamping assembly onto the edge
of a work bench or table whose thickness is at
least 55 mm.
♦
The stand is height-adjustable. Undo the
upper part of the stand by turning it anti-
clockwise (−). Pull out the tube to the maximum
height and lock it again by turning it clockwise
(+).
♦
The mount is also height-adjustable; turn
the black thread anticlockwise. After you have
set the mount to the correct height, tighten the
thread by turning in the opposite direction.
♦
Fix the appliance onto the mount of the
stand using the metal bracket . The mount
can be turned 360°.
Summary of Contents for 286851
