PSTDA 20-Li A2
■
18
│
GB
│
IE
Original accessories/auxiliary
equipment
■
Use only the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.
Information on saw blades
The Parkside basic equipment includes saw blades
for use with wood and metal.
▯
2 saw blades for general wood cutting
▯
1 saw blade for light metals up to 5 mm
NOTE
►
You can use any saw blade, provided it is
fitted with a suitable mounting (single-lug
shank).
►
To make long, straight cuts, use a suitable
saw blade (e.g. the supplied Parkside Speed-
wood saw blade).
Saw blade type
suitable
unsuitable
Before use
Charging the battery pack (see fig. A)
CAUTION!
►
Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger.
NOTE
►
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The storage climate
should be cool and dry and the ambient
temperature should be between 0°C and
50°C.
♦
Connect the battery pack to the high-speed
battery charger (see fig. A).
♦
Insert the power plug into the socket. The control
LED lights up red.
♦
The green LED indicates that the charging
process is complete and the battery pack
is ready.
CAUTION!
♦
If the red control LED flashes, this means
that the battery pack has overheated and
cannot be charged.
♦
If the red and green control LEDs both
flash, this means that the battery pack is
broken.
♦
Push the battery pack back into the appli-
ance.
♦
Switch off the charger for at least 15 minutes
between successive charging sessions.
To do this, disconnect the power plug.
Summary of Contents for 301845
Page 3: ...A...
Page 84: ...PSTDA 20 Li A2 80 CZ...
