17
GB
IE
or damage to property. The manufacturer
is not liable for damage which is caused
through inappropriate use or incorrect
operation. This equipment is not suitable
for commercial use. Commercial use will
invalidate the guarantee.
The device is part of the Parkside
X 20 V TEAM series and can be opera
-
ted using Parkside X 20 V TEAM series
batteries. The batteries may only be
charged using chargers from the Parkside
X 20 V TEAM series.
General description
The illustrations are on the
front and back fold-out page.
Extent of the delivery
- Cordless hot glue gun
- 3 glue sticks
- Storage case
- Instruction manual
Battery and charger are not
included.
Functional description
The hot glue gun heats up the glue stick,
liquefying it. After application, the glue
quickly cures, cooling down and harde-
ning. Read the sections below to learn
more about each operating element’s func-
tion.
Overview
A
1 On/off switch
2 Glue stick
3 Inlet channel
4 Rechargeable battery
5 Release button
6 LED work light
7 Trigger
8 Nozzle heat protective cover
9 Nozzle
10 Charger
11 Storage case
Technical data
Cordless hot glue gun ......... PHPA 20-Li A1
Device voltage U .........................20 V
Weight (with battery)...................
0.74 kg
Max. operating temperature (Tmax): 180°C
Reference heating time ..... approx. 60 sec
Glue flow rate
.................
up to 15 g/min
Glue stick diameter ...................... 11 mm
ON time per
battery charge .................approx. 30 min
Safety class ........................................ III
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with the
following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
This type of battery may only be charged
with the following chargers:
PLG 20 A1, PLG 20 A3, PDSLG 20 A1.
