24
PLS 48 D2
|
GB
Insert / replace the soldering tip
CAUTION! RISK OF BURNS!
f
Never heat the soldering iron
n
without soldering tips
t
.
The soldering tip may only be removed with the device switched off and
with the soldering tip cooled down .
The soldering tip has a screw thread and can therefore be replaced
quickly and easily on the soldering iron .
To remove, turn the soldering tip anti-clockwise .
To secure, turn the soldering tip clockwise .
First use
Switching on / off and setting the temperature
Switch on and set the temperature
Connect the plug into a suitable mains socket and press the ON / OFF
switch
r
into the position “I“ . Turn the temperature regulator
q
and set the
desired temperature .
NOTE
f
Before use, remove the protective cap from the soldering tip
t
.
f
Before using the soldering station for the first time and also when
using each new soldering tip, the soldering tip must be
t
tinned
first .
f
The prerequisite for perfect soldering is the use of suitable
solder . In addition, perfect soldering can only be achieved when
the correct soldering temperature is achieved . If the soldering
Summary of Contents for 306960
Page 3: ... ...
