27
PLS 48 D2
GB
|
Soldering
Inhaling the vapours may lead to headaches and fatigue
symptoms .
The soldering iron with a rated power of 48 watts is ideal for electronic
soldering .
Due to its design, it is particularly suitable for difficult to access and fine
soldering work .
Clean the soldering tip
t
on a moist solder sponge
s
.
After cleaning, the soldering tip must be tinned . Tin the hot soldering tip
by melting the solder
o
.
Bring the soldering tip to the soldering point and heat it .
Bring the solder (with flux) between the soldering point and the soldering
tip .
Apply additional solder until the entire solder joint is covered .
Immediately remove the soldering tip to avoid overheating the molten
solder .
Let the solder solidify and avoid vibrations .
NOTE
f
The flux is either contained in the solder or it is applied separately .
When purchasing, please find out about the type of application
and the appropriate solder
Summary of Contents for 306960
Page 3: ... ...
