PSSA 20-Li A1
■
2
│
GB
│
IE
│
NI
CORDLESS SABRE SAW
PSSA 20-Li A1
Introduction
Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety in-
structions . Use the product only as described and for
the range of applications specified . Please also pass
these operating instructions on to any future owner .
Intended use
This appliance is designed for sawing, cutting to
length and adapting wood, plastics, metal and
construction materials . The sabre saw is suitable for
rough sawing work, straight and curved cuts and
cuts off surfaces flush . Heed the information con-
cerning saw blades and practical advice on sawing .
Any other uses of or modifications to the machine
are deemed to be improper usage and may result in
serious physical injury . The manufacturer accepts no
responsibility for damage(s) attributable to misuse .
This appliance is not intended for commercial use .
Features
Saw blade (SWISS MADE)
Footplate
Quick-release chuck
Pendulum stroke switch
Ventilation slits
Safety lock-out
ON/OFF switch
Handle
Battery charge level button
Battery display LED
Battery pack*
Release button for battery pack
Locking lever for footplate
Red charge control LED
Green charge control LED
High-speed charger*
Package contents
1 cordless sabre saw PSSA 20-Li A1
1 saw blade for wood BIM 152 .5 mm
(SWISS MADE)
1 carrying case
1 set of operating instructions
Technical data
Cordless sabre saw: PSSA 20-Li A1
Rated voltage:
20 V (DC)
Rated idle stroke speed: n
0
0–3000 rpm
Stroke length:
20 mm
Max . cutting performance: Wood 100 mm
20 mm
(in non-alloyed steel)
Sawblade mounting:
1
/
2
" (12 .7 mm)
Battery: PAP 20 A1*
Type:
LITHIUM ION
Rated voltage:
20 V (DC)
Capacity:
2 .0 Ah
Cells: 5
High-speed battery charger: PLG 20 A1*
INPUT:
Rated voltage:
230–240 V ~, 50 Hz
(AC)
Rated power
consumption:
65 W
Fuse (internal):
3 .15 A
T3.15A
OUTPUT:
Rated voltage:
21 .5 V (DC)
Rated current:
2 .4 A
Charging time:
approx . 60 min
Protection class:
II / (double insulation)
* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise emission value:
Noise measurement value determined in accor-
dance with EN 60745 . The A-rated noise level of
the tool is typically:
Sound pressure level: L
PA
= 88 dB(A)
Uncertainty:
K =
3 dB
Sound power level:
L
WA
= 99 dB(A)
Uncertainty:
K =
3 dB
