Parkside 313266 1904, Translation Of The Original Instructions

■ 

32 

│

GB

│

MT

PHSHE 900 B2

Keep bystanders away from the appliance!

Protect the appliance from rain and moisture!

Risk of fatal electric shock! Keep at least 10 m 
away from above-ground power lines.

Attention! Falling objects. 
Especially when cutting above head height.

Caution! Risk of injury due to running blades!

Unplug the appliance immediately if the cable is 
damaged or has been cut.

Sound power level LWA data in dB.

General Power Tool  

Safety Warnings

WARNING!

►

Read all safety warnings and all instructions. 

Failure to follow the 

warnings and instructions may result in electric shock, fire and/or 
serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (cor-
ded) power tool or battery-operated (cordless) power tool.

1.  Work area safety

a)  

Keep work area clean and well lit.

 Cluttered or dark areas invite to 

accidents.

b)  

Do not operate power tools in explosive atmospheres, such as in 
the presence of flammable liquids, gases or dust.

 Power tools create 

sparks which may ignite the dust or fumes.

c)  

Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2.  Electrical safety

a)  

Power tool plugs must match the outlet. Never modify the plug in  
any way. Do not use any adapter plugs with earthed (grounded) 
power tools.

 Unmodified plugs and matching outlets will reduce risk of 

electric shock.

b)  

Avoid body contact with earthed or grounded surfaces, such as 
pipes, radiators, ranges and refrigerators.

 There is an increased risk 

of electric shock if your body is earthed or grounded.

c)  

Do not expose power tools to rain or wet conditions.

 Water entering 

a power tool will increase the risk of electric shock.

d)  

Do not abuse the cord. Never use the cord for carrying, pulling or 
unplugging the power tool. Keep cord away from heat, oil, sharp 
edges or moving parts.

 Damaged or entangled cords increase the  

risk of electric shock.

e) 

 When operating a power tool outdoors, use an extension cord suit-
able for outdoor use.

 Use of a cord suitable for outdoor use reduces 

the risk of electric shock.

f)  

If operating a power tool in a damp location is unavoidable, use 
a residual current device (RCD) protected supply.

 Use of an RCD 

reduces the risk of electric shock.

3.  Personal safety

a)  

Stay alert, watch what you are doing and use common sense when 
operating a power tool. Do not use a power tool while you are tired 
or under the influence of drugs, alcohol or medication.

 A moment of 

inattention while operating power tools may result in serious personal 
injury.

b)  Use

 personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat, 
or hearing protection used for appropriate conditions will reduce personal 
injuries.

c)  

Prevent unintentional starting. Ensure the switch is in the off position  
before connecting to power source and/or battery pack, picking  
up or carrying the tool.

 Carrying power tools with your finger on  

the switch or energizing power tools that have the switch on invites  
accidents.

d)  

Remove any adjusting key or wrench before turning the power tool  
on.

 A wrench or a key left attached to a rotating part of the power tool  

may result in personal injury.

e)  

Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

f)  

Dress properly. Do not wear loose clothing or jewellery.  
Keep your hair, clothing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving parts.

g)  

If devices are provided for the connection of dust extraction and 
collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

4.  Power tool use and care

a)  

Do not force the power tool. Use the correct power tool for your 
application.

 The correct power tool will do the job better and safer  

at the rate for which it was designed.

b)  

Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous 
and must be repaired.

c)  

Disconnect the plug from the power source and/or the battery pack 
from the power tool before making any adjustments, changing 
accessories, or storing power tools..

 Such preventive safety measures 

reduce the risk of starting the power tool accidentally.

d) 

 Store idle power tools out of the reach of children and do not allow 
persons unfamiliar with the power tool or these instructions to 
operate the power tool.

 Power tools are dangerous in the hands of 

untrained users.

e)  

Maintain power tools. Check for misalignment or binding of moving 
parts, breakage of parts and any other condition that may affect the 
power tool's operation. If damaged, have the power tool repaired 
before use.

 Many accidents are caused by poorly maintained power 

tools.

f)  

Keep cutting tools sharp and clean.

 Properly maintained cutting tools 

with sharp cutting edges are less likely to bind and are easier to control.

g)  

Use the power tool, accessories and tool bits etc. in accordance 
with these instructions, taking into account the working conditions 
and the work to be performed.

 Use of the power tool for operations 

different from those intended could result in a hazardous situation.