Parkside 315148 Operating And Safety Instructions Manual Download

Page: 7 / 76

GB/IE/NI

1. Introduction

MANUFACTURER:
scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and suc-
cess.

NOTE:

According to the applicable product liability laws, the manu-
facturer of the device does not assume liability for damages
to the product or damages caused by the product that occurs
due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, by not authorized service techni-

cians,

• Installation and replacement of non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due to the

non-compliance of the electric regulations and VDE regula-
tions 0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the operating instructions be-
fore installing and commissioning the device.
The operating instructions are intended to help the user to be-
come familiar with the machine and take advantage of its ap-
plication possibilities in accordance with the recommendations.
The operating instructions contain important information on
how to operate the machine safely, professionally and econom-
ically, how to avoid danger, costly repairs, reduce downtimes
and how to increase reliability and service life of the machine.
In addition to the safety regulations in the operating instruc-
tions, you have to meet the applicable regulations that apply
for the operation of the machine in your country.
Keep the operating instructions package with the machine at
all times and store it in a plastic cover to protect it from dirt and
moisture. Read the instruction manual each time before operat-
ing the machine and carefully follow its information.
The machine can only be operated by persons who were in-
structed concerning the operation of the machine and who are
informed about the associated dangers. The minimum age re-
quirement must be complied with.
In addition to the safety notes contained in the present oper-
ating instructions and the special regulations of your country,
the generally recognized technical rules for the operation of
machines must be observed.
We accept no liability for damage or accidents which arise
due to non-observance of these instructions and the safety in-
formation.

2. Device description (fig. 1-11)

1.  Grinding plate
2.  Front handle
3.  Wing nut
4.  LED light
5.  Setting speed range
6.  Locking knob
7.  Main handle
8.  Power cord
9.  Additional handle
10.  Connection for dust extractor
11.  Telescopic extension
12.  Lock for telescopic extension
13.  ON/OFF switch
14.  Flexible suction hose
15.  Hose adaptor
16.  Sanding paper
17.  Allen key
18.  Screwdriver
19.  Carbon brushes

3. Scope of delivery

1 Drywall sander
1 flexible suction hose (14)
6 abrasive sheets (16) (different grain sizes)
1 Phillips screwdriver (18)
2 replacement carbon brushes (19)
1 Allen key (17)
1 Cotter pin (C)

4. Intended use

The intended use of this power tool is the sanding of large ar-
eas of drywalls as a preparation before painting or wallpaper-
ing using suitable abrasive sheets.

This power tool is neither suited for the preparation of small
areas, corners and edges, nor for the removal of wallpaper
and the grinding of ceilings and wet grinding.

Do not use the power tool for cutting or roughing or polishing.
Do not use it together with wire brushes. Do not treat asbestos
containing materials with this power tool.

Please note that our equipment has not been designed for use
in commercial, trade or industrial applications. Our warranty
will be voided if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.

5. Safety information

WARNING! Read all safety warnings and all

instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.