background image

24

GB

IE

Do not unplug the cable by tug-

ging on it. Keep the cable away 

from heat, oil and sharp edges.

•  Connect the appliance to a pow-

er socket with a residual current 

circuit breaker of rated residual 

current no more than 30 mA.

Residual risks

Even if properly operating and han-

dling this electric tool, some residual 

risks will remain. Due to its construc-

tion and build, this electric tool may 

present the following hazards:

a) Cuts

b) Ear damage if working without 

ear protection.

c) Damage to your health caused by 

swinging your hands and arms 

when operating the appliance 

for longer periods of time or if 

the unit is not held or maintained 

properly.

 

Warning! During operation, 

this electric tool generates an 

electromagnetic field which, 

under certain circumstances, 

may impair the functionality 

of active or passive medical 

implants. To reduce the risk of 

serious or lethal injuries, we 

recommend that persons with 

medical implants consult their 

doctor and the manufacturer 

of their medical implant before 

operating the machine.

Assembly instructions

  Always disconnect the tool 

from the mains before con-

ducting any work on it. 

  While assembling the tool, 

make sure that the mains 

cable (2) does not become 

caught and has enough slack.

Mounting the handlebars

(pre-mounted)

B

  1.  Fasten the central bar (3) onto 

the lower bar (4). Use a screw, 
quick-release lever and washer 
(11) to fasten.

 

2.  Attach the handlebar (1) to the 

central bar (3). Use a screw, 
quick-release lever and washer 
(11) to fasten.

  When properly mounted, the ends 

of the handlebar will point away 
from the front of the appliance (see 
illustration 

A

).

 

3.  Fasten the mains cable (2) with 

the cable clip supplied (10). 
Position the cable clamp (10) on 
the upper end of the centre spar 
(3). Press the cable clamp (10) 
onto the centre spar (3) and slide 
the cable clamp (10) onto the 
round part of the centre spar (3).

Operation

  Observe noise-abatement laws and 

local by-laws.

  Before putting into 

operation

Fold the handlebars up. Attach the quick-
release levers (11) to the handlebars. 

Summary of Contents for 324395 1907















































































































Reviews: