GB
│
IE
│
NI
│
CY
│
9
■
PBSD 600 A1
Tips and tricks
■
Never use the same abrasive belt to work
wood and metal .
■
Worn or cracked abrasive belts can damage
the workpiece . Therefore, be sure to replace
worn abrasive belts before starting work .
■
Always hang up the abrasive belts to store
them, as kinks etc . can make them unusable .
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
off the appliance and pull out the
power plug before starting any
work on the appliance.
The belt grinder is maintenance-free .
■
Always clean the appliance directly after
finishing work .
■
Use a dry cloth to clean the housing . Under no
circumstances should you use fuel, detergents,
solvents or abrasive cleaners .
Emptying/cleaning the dust collector
♦
Pull the dust collector off the appliance .
♦
Empty the dust collector completely by
knocking out the contents and then push the
dust collector back onto the appliance .
♦
Ensure ventilation openings are always free .
♦
Remove any adhering grinding dust with a
brush .
Disposal
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling
plant .
Do not dispose of power tools
in your normal domestic waste!
European Directive 2012/19/EU
requires that worn-out power tools be
collected separately and recycled in an environ-
mentally compatible manner .
Your local community or municipal authorities
can provide information on how to dispose of the
appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary . The pack-
aging material is labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites .
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
Summary of Contents for 339668 1910
Page 3: ...A ...
