Parkside 345815 2001, Translation Of The Original Instructions

PMFS 200 C3

■ 

4 

│

GB

│

IE

│

NI

│

CY

e) 

 When working outdoors with an electrical 
power tool, always use extension cords that 
are also suitable for use outdoors.

 Use of a 

cord suitable for outdoor use reduces the risk of 
electric shock.

f)  

If operating a power tool in a damp location 
is unavoidable, use a residual current device 
(RCD) protected supply.

 Use of an RCD reduc-

es the risk of electric shock.

3.  Personal safety

a)  

Stay alert, watch what you are doing and 
use common sense when operating a power 
tool. Do not use a power tool while you are 
tired or under the influence of drugs, alcohol 
or medication.

 A moment of inattention while 

operating a power tool may result in serious 
personal injury.

b)  

Use personal protective equipment. Always 
wear eye protection.

 Protective equipment such 

as a dust mask, non-skid safety shoes, hard hat 
or hearing protection used for appropriate condi-
tions will reduce personal injuries.

c)  

Prevent unintentional starting. Ensure the 
switch is in the off-position before connecting 
to power source and/or battery pack, picking 
up or carrying the tool.

 Carrying power tools 

with your finger on the switch or energising pow-
er tools that have the switch on invites accidents.

d)  

Remove any adjusting key or wrench before 
turning the power tool on.

 A wrench or a key 

left attached to a rotating part of the power tool 
may result in personal injury.

e)  

Do not overreach. Keep proper footing and 
balance at all times.

 This enables better control 

of the power tool in unexpected situations.

f)  

Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair and clothing away 
from moving parts.

 Loose clothes, jewellery or 

long hair can be caught in moving parts.

g)  

If devices are provided for the connection of 
dust extraction and collection facilities, ensure 
these are connected and properly used.

 Use of 

dust collection can reduce dust-related hazards.

h)  

Do not allow yourself to get lulled into a false 
sense of security and do not ignore the safety 
rules for power tools, even if you are familiar 
with the power tool after repeated use.

 A 

careless action can cause severe injury within a 
fraction of a second.

4.  Power tool use and care

a)  

Do not force the power tool. Use the correct 
power tool for your application.

 The correct 

power tool will do the job better and safer at 
the rate for which it was designed.

b)  

Do not use the power tool if the switch does 
not turn it on and off.

 Any power tool that 

 cannot be controlled with the switch is danger-
ous and must be repaired.

c)  

Disconnect the plug from the power source 
and/or remove the battery pack, if detach-
able, from the power tool before making any 
adjustments, changing accessories, or storing 
power tools.

 Such preventive safety measures 

reduce the risk of starting the power tool acci-
dentally.

d)  

Store idle power tools out of the reach of 
 children, and do not allow persons unfamiliar 
with the power tool or these instructions to 
operate the power tool.

 Power tools are dan-

gerous in the hands of untrained users.

e)  

Maintain power tools and accessories. Check 
for misalignment or binding of moving parts, 
breakage of parts and any other condition 
that may affect the power tool’s operation. If 
damaged, have the power tool repaired be-
fore use.

 Many accidents are caused by poorly 

maintained power tools.

f)  

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting 
edges are less likely to bind and are easier to 
control.

g)  

Use the power tool, accessories and tool bits, 
etc., in accordance with these instructions, 
taking into account the working conditions 
and the work to be performed.

 Use of the 

power tool for operations different from those 
intended could result in a hazardous situation.

IB_345815_PMFS200C3_GB-IE-NI.indb   4

19.08.20   12:02