Parkside 353304 2007, Original Instructions Manual

NI

CY

IE

GB

6

Technical data

Cordless screwdriver ...... PSSA 4 B2

Motor voltage U

max

 ...............4 V  ; 2 Ah 

Rated speed (n

0

)

 .......................200 min

-1

Torque

 ................................ max. 10 Nm

Weight (without charger)

..............0.45 kg

Sound pressure level 

(L

pA

)

 ......................

53.2 dB(A), K= 3 dB

Sound power level 

(L

WA

)

 .....................

64.2 dB(A), K= 3 dB

Vibration while tightening a screw

(a

h

)

 .................< 2.5 m/s

2

, K= 1.5 m/s

2

Battery (Li-Ion)

Battery cells ......................................... 1
Nominal voltage ........................... 4 V
Capacity ........................................ 2 Ah
Charging time .................... approx. 1 h*

Temperature

...........................

max. 50 °C

Charging process ...................

0

 - 45 °C

Operation ..........................

-20 - 50 °C

Storage .................................

0 - 45 °C

* only in conjunction with the supplied charger.

Charger ......WJB-Y130502200WU1

Voltage input ....................... 100-240 V~ 
Input AC frequency .................. 50-60 Hz
Voltage Output ......................... 5,0 V 
Output current ...............................2,2 A
Nominal consumption .....................25 W
Protection class ................................   II
Protection category..........................  IPX0

The noise and vibration levels have been 

calculated according to the norms stated in 
the conformity statement. 

The stated vibration emission value was 

measured in accordance with a standard 
testing procedure and may be used to com-

pare one power tool to another. The stated 

vibration emission value may also be used 
for a preliminary exposure assessment.

 Warning

: The vibration emission 

value may differ during actual use 
of the power tool from the stated 
value depending on the manner in 
which the power tool is used.Safety 
precautions aimed at protecting the 
user should be based on estimated 
exposure under actual usage condi-

tions (all parts of the operating cy

-

cle are to be considered, including, 
for example, times during which the 
power tool is turned off and times 
when the tool is turned on but is 

running idle). 

Safety information

When using the device, please observe the 
safety instructions.

Symbols

Symbols in the manual

Warning symbols with in-
formation on damage and 
injury prevention

Instruction symbols with information 
on preventing damage

Wear ear protection.

Help symbols with information on 
improving tool handling

Symbols on the unit

Before using for the first time, care

-

fully read through the user manual.

Li-Ion

Do not dispose of the device 
with the battery installed in 
household waste.