GB
12
from an electric
shock.
• The device may only be
powered with SELV (Safety
Extra Low Voltage) as indi-
cated by the label on the
appliance.
• Charge the battery before
using it for the first time.
• To charge the Li-ion battery
integrated in the appliance,
use
only
the XZ0900-
2400ENCNC charger
supplied.
• Always comply with the
latest safety instructions,
as well as the regulations
and information relating to
environmental protection.
• Defects resulting from im-
proper handling are not
covered by the warranty.
Charging the
battery
1. Connect the charging
cable connector (9) to the
charging socket (7) on the
device.
2. Plug the charger (
8)
into a socket.
3. The battery indicator (6)
lights up:
Flashing red -
battery
almost empty,
charging
Flashing orange (red illu-
minated) -
battery
2/3 empty, char-
ging
Flashing green (red/oran-
ge illuminated)
-
battery 1/3
empty, charging
Red/orange/green illuminated
-
battery is fully
charged
4. Once charging is complete,
disconnect the charger
(
8) from the mains sup-
ply.
Initial start-up
Before each use, ensure the
filter (12) and filter holder (11)
are sitting correctly in the col-
lection container (1).
Also inspect the device visually
for damage.
Do not operate the
device if damaged or
incorrectly assembled!
Replace damaged parts
