Parkside 364690 2101, Operation And Safety Notes

9 

GB

Note: 

Charge the product at least once a month, if 

it is to remain unused for an extended period of time. 

Note: 

If the product has not been charged for an 

extended period of time (approx. 2 months), you 
could find that the integral rechargeable battery 
has entered a dormant state. Charge and discharge 
the product a number of times in succession to  
reactivate the integral rechargeable battery. 

Note: 

You can choose to charge the product directly 

via the mains adaptor 

12

 or via the charging station.

 Before charging, switch

the product off (press 

ON / OFF  switch 

3

).

 To charge the product via mains adaptor 

12

directly, remove the red rubber cover at the back 
of the product, connect the USB cable 

11

 with 

the USB connector of the mains adaptor 

12

and then connect the USB (type C) connector 
on the USB cable 

11

 to the USB (type C) input 

socket 

6

 of the LED torch. 

 To charge the product via the charging station, 
connect the USB cable 

11

 with the USB connec-

tor of the mains adaptor 

12

 and then connect 

the USB (type C) connector on the USB cable 

11

 to the USB (type C) input socket of the 

charging station 

10

. Then place the product 

into the charging station to charge the product 
(see fig. B).

 Note:

 The power indicator of the charging 

station 

9

 will turn to red light when electrical 

power is connected. It will light up red contin-
uously until the power is disconnected.

 Note:

 The product is fitted with an overcharge 

protection circuit. Despite this, you should dis-
connect the LED inspection lamp from the power 
supply after the charging process is complete.

 Note: 

The green charging indicators (LED torch) 

4

 will light up and flash during charging. There 

are 4 indicator lights showing the charging 
progress (approx. 25 % / 50 % / 75 % / 100 %). 
When the indicator continually light on mean 
the represented charging progress was finished. 
When charging is complete, all indicator light 
out of the socket. Disconnect the mains adaptor 

12

from the product to prevent the rechargeable 
battery from discharging.

Use

CAUTION! RISK OF ACCIDENT! 

Always 

store and secure the product in such a way that there 
is no risk of injury from or damage to the product.

Note:

 The product may be secured with the fold-

out hook 

5

 or by securing it to a flat, ferromagnetic 

surface using the magnetic base 

8

 or the magnet 

7

 at the back. You can tilt the product up to 180 ° 

on the magnetic base 

8

.

CAUTION!

 Please note the position of your hands 

whilst turning the magnetic base 

8

 to prevent 

pinching your fingers (see Fig. D).

Using the product without  

a power connection

Fully charge the product as described in the 
section “Charging the product“.

 The product can be operated in 4 different 
modes, select these by:  
Repeatedly pressing the ON / OFF switch 

3

.

Press once: 

 The side light 

2

 lights up 

with white light. 

Press twice: 

 The side light 

2

 turns to 

UV light mode.

Press three times:   Switches the side light 

2

off and switches on the 
spotlight 

1

.

Press four times:   Switches off the product.

  Corded use of the product

Use the included mains adaptor 

12

 for this pur-

pose. Using the respective mains adaptor 

12

, 

connect the product to a suitable power supply.

Then proceed as described under “Using the 
product without a power connection“ (starting 
with step 2).

 Note:

 The product can only be charged 

whilst off!